Brillion SSBP-36

BrillionSSBP 36

Double tap to zoom

BrillionSSBP 36

 

Features

Get the Job Done 36' at a Time

  • 36' Seeding Width
  • 3 - 12' Three-Point Hitch Seeders Standard
  • Seeder Choices
    • Standard Series Agricultural Seeder with Front and Rear Seed Boxes
    • Mid-Size Agricultural Seeder
    • High Capacity Agricultural Seeder
  • Cast Single Lip Cat. IV Hitch
  • Hydraulic Leveling Hitch
  • Transport Width Under 13' 6"
  • Center Section is Carried by 12.5L x 15 (GY-Fl) Load F Tires with 8 Bolt Hubs and 2 7/8" Slip-In Spindles
  • Wings Equipped with 11L x 15, 12 Ply Tires with 6 Bolt Hubs and 2" Spindles
  • Wings Float Up 14 Degrees and Down 14 Degrees for Superior Contour Following and Precision Seed Placement
  • Coil Tine Track Remover Kit Standard for Center Section
  • Wheel Track Removers Standard for Wing Tires
  • Each Seeder is Mounted to the Main Frame Via a Three-Point Hitch Allowing Each Seeder to Raise and Lower in the Field without Changing Position of the Main Frame
  • Electric Shut Off Clutches Control Each Seeder Individually
  • Electronic Acre Meter Kit Standard Equipment
  • Seed Shaft Monitor Kit Standard Equipment
  • Folding Row Marker Kit Available
  • LED Safety Warning Lights
  • Powder Coat Paint

Specifications

Model SSBP-36
Description (3) SSBP-12 Agricultural Seeders
Approximate Weight (Empty) 18,440 lbs. (8,364 kg)
Working Width 36 ft. (10.97 m)
Transport Width 13 ft. 6 in. (4.1 m)
Transport Height 11 ft. (3.4 m)
Overall Length 31 ft. (9.4 m)
Hitch Cast Single Lip Cat. IV
Wheels - Center Section 8 Bolt Hubs with 2 7/8 in. (73.1 mm) Slip In Spindles
Wheels - Wings 6 Bolt Hubs with 2 in. (50.8 mm) Spindles
Tires - Center Section (4) 12.5L x 15, (GY-Fl) Load F
Tires - Wings (4) 11 L x 15, 12 Ply
Hydraulic Circuits Required 3 (+1 for Row Marker Kit)
Seed Box All Steel Construction
Seed Box Capacity 15.75 Bushels (555.0 l) Front / 15.75 Bushels (555.0 l) Rear
Seed Metering Standard Micro-Meter Front / Blade Agitator Rear
Seed Metering Drive Independent Electric Seeder Clutches
Pulverizer Rollers Gray Cast Iron with Notched Profile
Front Roller (Fixed) 14.5 in. (368.3 mm) Diameter
Rear Roller (Independently Floating) 10.25 in. (260.4 mm) Diameter
Blade Agitator for Rear Seed Box Standard (Factory Installed)
Cage Agitator for Rear Seed Box Standard
Brush Agitator for Rear Seed Box Optional
Front Seed Box Divider Kit Standard
Rear Roller Assembly with Turfmaker Sprockets Optional
Folding Row Marker Kit Optional
Wheel Track Removers - Wings Standard
Coil Tine Track Remover Kit - Center Section Standard
Front Roller Scraper Kit for One Seeder Optional
Electronic Acre Meter Kit Standard
Seed Shaft Monitor Kit Standard
LED Safety Warning Lights & SMV Emblem Standard
Safety Chain Kit Standard
Powder Coat Paint, Red Standard
Horsepower Requirements Minimum of 200 HP (149.1 kW)
Recommended Operating Speed 4.5 to 6.0 MPH (7.2 to 9.7 km/h) Dependent on Conditions