Bush Hog 3210

3210Lift 1

Double tap to zoom

3210Lift 1

 

Features

Performance Features
  • 3210 Series comes in a Lift, Pull, Semi-Mount & Offset Model
  • Rubber Element Cross Shafts
  • Heavy Duty Cushioned Axles
  • Two Round Blade Holders
  • See Specifications Page For Models 3210 & 3210 Offset

 

Construction Features
  • 10-gauge Deck Construction
  • 7-gauge Strongbacks
  • 1/4-inch Sidebands
  • Rubber Cushioned Axle Arms
  • 5 Year Gearbox Limited Warranty
  • Powder Coat Paint


Product Features

All Bush Hog® Multi-Spindle rotary cutters feature structural steel bracing and reinforced welding at all high stress points. Streamlined deck design inhibits trash and water buildup problems.

Shields over all cross shafts fold conveniently out of the way to allow quick access to clutch or universal joints.

Special rubber-cushioned axle arms reduce shock loads during operation and transport.

A wide angle, constant velocity driveshaft on pull models relieves the PTO working angle. This reduces vibration and allows smoother cutting in sharp turns.

Specifications

Model 3210
Cutting Width 10-feet 6-inches
Cutting Capacity Up to 3-inches
Cutting Height 2 to 13-inches
Dimensions (width x Length) 11-feet 1-inch x 9-feet 10-inches (Lift)
Type Hitch 3-Point Cat. II & III Standard & Quick Hitch Cat. II & III Semi-Mount and Center Pull (Self-Leveling)
Deck Thickness 10-gauge
Side Bands 1/4-inch x 10-inches
Minimum Tractor HP 50 PTO (Pull); 60 PTO (Lift)
Driveline ASAE Category 5 (540 RPM - Lift, Pull & Semi-Mount); ASAE Cat. 4 (1,000 RPM Pull)
Cross Shaft ASAE Cat. 5 Rubber Element
Gearbox HP (3) 210 Center and 205 Outboard
Tractor PTO Speed 540/1,000 RPM
Driveline Protection 4 Plate PTO Slip Clutch
Height Adjustment Manual or Hydraulic
Blade Holder(s) Round
Blades 1/2-inch x 4-inches - Uplift
Blade Tip Speed 16,881 FPM/540 RPM; 17,400/1,000 RPM
Blade Overlap 3-inches
Tires Laminated, Airplane (Pull Only)
Axles Rubber Cushioned; Choice of Single or Dual Axle for Pull Models
Deflectors Selection: Front Chains and Rear Bands or Chains
Safety Tow Chain Standard for Pull Models
Approximate Weight (Pull with Single Axle) 2,741-lbs.