Case IH Steiger 580 Quadtrac

Double tap to zoom

 

Features

Transmission

The 16-speed, full powershift Steiger transmission produces smooth shifting and reduces fatigue at the end of a long day in the field. It accomplishes this through pulse-width modulation, which allows the smoothest possible shifts under load. The newest version of this proven transmission also features larger gears and clutch packs that deliver years of service while transmitting up to 682 peak horsepower to the ground for large-scale farming.

Efficient Power Shift Transmission

  • Nine gears in the field working range - to maximize on productivity in the working range of 3-8 MPH
  • 16 forward speeds for efficient power transfer
  • Electronically controlled shifting allows for smooth shifts with features with ease of operation:
    • Diesel Saver™ Automatic Productivity Management (APM) saves fuel by selecting most efficient gear range
    • Skip Shifts that provide faster speed increases in the field and on the road
    • Fwd & Rev Power Shuttle Shifts (Steering Column / MultiFunction Handle)
    • Shuttle Capability up to 6.5 MPH / 8th Gear
    • Programmable start-up in gears 1-8
    • Constant mesh helical cut gears provide quiet operation
    • Oil level sight gage for ease of daily maintenance inspection
    • Sensitivity settings to provide smoother shifting operation
    • Ground level filter service
    • Cab controlled transmission calibration for smoother efficient operation

 

Axles

Steiger tractors feature massive axles that can carry up to 66,000 pounds of operating weight. That's the most weight any tractor out there can handle. And it means your Steiger tractor can work with the largest implements and cover more acres in a day. All Steiger tractors have a frame built of 1/2-inch thick steel and a longer wheelbase with built-in weight.

  • For Steiger 580 and 620 Models: Features 5.5-inch axles and 18-bolt hubs, so you don't have to worry about the drivetrain when the time comes for the required power you need to farm how you want.
  • For Quadtrac Models: Features immense, flange-type axle that generates the torque needed for Quadtrac's unbeatable traction capabilities
  • Automatic on and off differential locks on all standard equipment

 

Hydraulics

113 gallons per minute flowing through up to eight hydraulic remote valves, and up to 20,000 pounds of hitch-lift capacity.

That's enough hydraulic flow for even the biggest planters and air seeders in the industry. And it doesn't require a separate system or pump, meaning it's easier to monitor and more reliable.

And the new electronic precision remote, quick-connect valves make your operation even more efficient by maintaining precise flow and pressure - even in the more severe conditions.

Set the system how you want, and it adjusts for changing conditions through the day.

Scraper Application

All Steiger tractors feature massive, heavy-duty axles that can carry up to 66,000 pounds of operating weight. That’s the most weight any tractor in its class can handle. Figure in heavy-duty drawbars, built-in frame weight and a rugged transmission, and you’ll see why Steiger tractors really are a big deal. The longer wheelbase and built-in weight of a heavy frame on Steiger 470 tractors provide more power to the ground plus the heft and durability needed for earth moving work. The wide frame of 500, 540, 580 and 620 HD wheeled models set new productivity benchmarks for the industry. Features like heavy-duty drivetrain components, 113-gallon-per-minute hydraulic flow and power growth up to 682 peak horsepower are raising the bar as well.

Drive System

The only factory-integrated drive system of its kind.

The proven technology of the Case IH Steiger Quadtrac is unparalleled in the industry. And now, it's time to take the next step with Steiger Rowtrac​ design.

The Case IH Steiger Rowtrac tractor's four-track, positive drive system is the only factory integrated drive system of its kind in the world. With equal-sized, independent, oscillating tracks, you can get in fields sooner and maximize the opportunity for high-yielding crops. It also minimizes ground pressure and reduces compaction, improves traction and simplifies transport.

This exclusive design allows you to cover more ground in less time, even when field conditions are less than optimal.

Quadtrac System

The four individually driven, oscillating tracks of a Steiger Quadtrac give you greater ground contact that rubber tires or two-track systems could never match. The result strikes a balance between productivity and efficiency you also won't find anywhere else. Better traction and less slippage. Greater flotation and reduced compaction. It's a design with a clean and proven competitive advantage.

The four tracks of a Steiger Quadtrac distribute weight more evenly and efficiently than two-track systems, reducing compaction. That leads to numerous benefits like better flotation and traction, and easier transport. That's because Quadtrac distributes loads evenly across the length of each track - even with the added weight of a load putting force onto the rear tracks.

Delivering more usable power you can depend on is possible because of the exclusive Quadtrac positive-drive design. Lugs that interlock with bars on the drive wheel and track. That's because a positive drive is continuous at all times, even in a wet or slippery spot. The Steiger Quadtrac positive drive adjusts automatically under transport or light loads that reduce wear, friction and heat - and increases durability.

Quadtrac 5 axle design provides more even power supplied to the soil, therefore providing less ground pressure, creating a more agronomic seed bed.

Specifications

Make Case IH
Model Steiger 580 Quadtrac (2014-Present)
Engine Performance  
Advertised Engine Power, Rated, hp (kW) 580 (433)
Maximum Engine Power, hp (kW) 638 (476)
Rated Engine Speed, rpm 2100
Power Boost, hp (kW) 58 (43)
Fuel Tank capacity, gal (L) 470 (1779)
Diesel Exhaust Fluid (DEF) tank capacity, gal (L) 85 (322)
PTO Performance  
PTO Horsepower, Basic / Optional Transmission, hp (kW) 473 (353)
PTO Speeds, rpm 1000
PTO operational Type (Independent; Live; Continuous) Independent
Basic Engine  
Engine Make Case IH FPT
Engine Model 12.9 L, Two-Stage Turbo
Number of Cylinders 6
Displacement, cu in (L) 787 (12.9)
Engine Bore, in (mm) 5.31 (135)
Engine Stroke, in (mm) 5.91 (150)
Block Design, Replaceable Liners Wet liners
Aspiration, Turbocharged or Naturally Aspirated Two-Stage Turbocharged, Inter- & Aftercooled
Fuel System  
Fuel System Description High Pressure Common Rail
Fuel System Control, Electronic or Mechanical Electronic
Fuel Injection to combustion chamber, Direct or Indirect Direct
Emission and Exhaust Treatment  
Emission Level, US EPA Tier Tier 4B / Final
Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF) SCR w/ DEF
Exhaust Gas Recirculation (EGR) No
Cleanup Catalyst (CUC) CUC standard
Diesel Oxidation Catalyst (DOC) DOC standard
Diesel Particulate Filter (DPF) No
Exhaust Pipe, Vertical stack or Horizontal Vertical stack
Cooling System  
Fan Drive Type Hydraulic fan drive
Electrical System  
System Rating, Volts 12 V System; 24 V Start
Alternator Rating, Amps 240
Basic Transmission Configuration  
Manufacturer's Description 16F x 2R Full Powershift
Transmission Type Full powershift
Number of Forward / Reverse Speeds 16F / 2R
Maximum Speed Forward, mph (kph) 25 (40)
Creeper Range Available No
Shuttle (Forward-Reverse) Available Yes
Optional Transmission 1  
Manufacturer's Description No option
Transmission Type No option
Number of Forward / Reverse Speeds No option
Optional Transmission 2  
Manufacturer's Description No option
Transmission Type No option
Number of Forward / Reverse Speeds No option
Wheel or Track Configuration  
Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks 4 Tracks
Steering Configuration: Front Steer, Frame Articulated, or Track-type Steer Frame Articulated
Rear Axle Assembly  
Final Drive Location and Description Planetary & Planetary Drop Gear
Axle Output End, Flange or Bar Flange
Axle Bar Diameter, in (mm) No bar axle
Front Axle  
Suspended Front Axle Available No
Brakes  
Service Brake Type Wet disc
Hydraulic System  
Hydraulic System Type Pressure Flow Compensated
Main Hydraulic Pump Type Single pump std; TwinFlow opt.
Implement Pump Flow, gpm (Lpm) 42 (159)
Optional Pump Flow, gpm (Lpm) 57 (216); 113 (428)
Number of Standard Remote Valves 4 std; up to 8 total
3-Point Hitch Features  
3-Point Hitch Category Category 4N Quick Coupler
Optional Hitch Category No option
Draft Sensing or Lift Control Three Position, Lift, Hold, Lower
Draft Link Ends Telescopic Quick Coupler
3-Point Hitch Lift Capacity  
Standard Lift Capacity 24 Inches behind pin, lb (kg) 19,728 (8949)
Optional Lift Capacity 24 Inches behind pin, lb (kg) No option
Standard Lift Capacity at lift pin, lb (kg) np
Optional Lift Capacity at lift pin, lb (kg) No option
Drawbar  
Drawbar Description Category 4; Cat 5 opt.
Wheelbase / Trackbase  
Wheelbase, 2WD, in (mm) No 2WD
Wheelbase/Trackbase, MFD/4WD or Track, in (mm) 154 (3912)
Length  
Length, 2WD, incl. Hitch/Drawbar, in (mm) No 2WD
Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm) np
Vertical Dimensions  
Height to Top of Cab, in (mm) np
Height to Top of ROPS raised, in (mm) No open ROPS
Width w/Tires or Tracks  
Overall Width, with standard wheels or tracks, in (mm) np
Weight (w/Tires or Tracks)  
Weight, 2WD w/ROPS, lb (kg) No 2WD
Weight, MFD/4WD w/ROPS, lb (kg) Track, No MFD; No open ROPS
Weight, 2WD w/Cab, lb (kg) No 2WD
Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg) 48,780 (22126)
Weight, Total allowable, w/maximum ballast, lb (kg) 64,000 (29030)
Tire / Track Size  
Front Tire Size, 2WD SeeTrack Size
Front Tire Size orTrack Width, MFD/4WD or Track 30 to 36 (762 to 914) Rubber Track
Rear Tire Size or Track Width 30 to 36 (762 to 914) Rubber Track
Sales Literature  
Literature Number CIH12121301
Literature Date 12/1/2013
Secondary Literature Source  
Secondary Literature Number TA-1374-14
Secondary Literature Date 4/1/2014
Other Documentation  
Document Number --
Document Date --
Status and Entry Dates  
Manufacturing Status, Current or Archive Current
First Entry Date 10/1/2013
Revision Date 7/1/2014