Kuhn SR 50-10
The adjustable hitch design allows more precise matching of different tractor drawbar heights, from 11” to 22”. It also results in minimum hang down to help prevent crop wrapping. The design is compatible with a 2 5/16" ball hitch, available as an option.
Fully Welded Rear Frame
The rear main frame is fully welded for maximum strength and durability. This design helps the SR 50 provide reliable service and long life.
Adjustable Flotation Springs
Large, adjustable flotation leaf springs are positioned on the front of the frame for easy access. The leaf springs provide uniform flotation over field contours and reduce rake wheel wear by decreasing ground pressure. The decreased pressure also results in cleaner raking and is gentler on crop stubble.
Built-in Flotation Slots
Built-in mechanical flotation slots on the end of each cylinder eliminate the need for a tractor with hydraulic float for more economical operation. The slots allow the rake arms to adapt to irregular field conditions.
Simple Raking Angle Adjustment
Seven laser cut holes provide simple, easy adjustment of the raking angle to produce the ideal windrow for the crop and field conditions. The nut and bolt can be quickly removed and repositioned at the desired setting. It is also easy to match the setting on each side.
|Rake Type||Carted V-Rake|
|Working width (feet)||21'4"|
|Working width (m)||6.5|
|Minimum Windrow Width (feet)||3'7"|
|Maximum Windrow Width (feet)||8'11"|
|Minimum Windrow Width (cm)||110|
|Maximum Windrow Width (cm)||270|
|Number of Raking Wheels||10|
|Raking Wheel Diameter (m)||1.4|
|Raking Wheel Diameter (feet)||55"|
|Tire type||ST 175/80 D-13"|
|Number of Tines per Wheel||40|
|Transport width (m)||3|
|Transport width (feet)||9'9"|