Kuhn MM 300

Kuhn MM 300

Double tap to zoom

Kuhn MM 300

 

Features

Windguard System

To ensure a windrow of even density without knots or ropes of crop, the MM 902 merger features a patented crop guiding system. The windguard tines guide the crop from the pickup onto the belt. This ensures that it is delivered onto the belt exactly where it was collected from the field. It is not blown along the length of the machine or “bulldozed” and rolled by the pickups. By directing the crop onto the center of the belt, a uniform and fluffy windrow is formed.

Windguard

This standard curved windguard greatly helps create fluffy well-formed windrows by keeping crop close to the pickup and delivering it to the center of the belt. This control smooths out crop bunching, resulting in improved harvester efficiency. Simple adjustment points on each end allow the operator to tailor the windguard to the exact crop type and volume.

Heavy-Duty Conveyor

The 15-degree angled conveyor provides a seamless transition for the crop as it comes off the pickup. This allows the full capacity of the belt to be utilized in addition to naturally inverting the crop upon discharge.

Outstanding Flotation

The floating pickup assembly follows the terrain, supported by large-diameter gauge wheels that set the pickup height. This maintains the tine height so that valuable forage is picked up and the crop stubble is protected.

In-Cab Control Terminal

The optional electro-hydraulic controls manage merger functions on the go; fine-tune pickup speed, gather crop at end rows, shift the conveyor, and engage the optional extension, all conveniently from the tractor seat.

Specifications

Working width (inches) 9'6"
Working width (m) 2.85
Conveyor lenght - with extension conveyor (m) 4.8
Conveyor lenght - with extension conveyor (feet) 15'9"
Conveyor shift (hydraulic or manual) (cm) 61
Conveyor shift (hydraulic or manual) (feet) 2'
Transport lenght (m) 4.7
Transport width (feet) 12'6"
Transport lenght (feet) 15'8"
Overall Field Position Width - cross conveyor shifted in (m) 4.6
Overall Field Position Width - cross conveyor shifted in (feet) 15'3"
Overall Field Position Width - cross conveyor shifted out (m) 5.2
Overall Field Position Width - cross conveyor shifted out (feet) 17'2"
Self Contained Hydraulic Drive Standard
Hydraulic Tongue Swing Standard
Variable Pickup Speed Standard
Highway Transport Lights Standard
Minimum power requirement for PTO (kW) 37.5
Minimum power requirement for PTO (hp) 50
PTO speed (rpm) 540
Tractor hydraulic equipment 2 DBL