Kuhn VARI-LANDER XC 4 - 7
Fitted with non-stop security for the Vari-Lander, the disc coulters are available in plain or notched form. The discs ensure a clean cut in front of the plow bottom giving a clean furrow wall and improving the trash incorporation of the moldboard. The discs are adjustable in two dimensions: height and side to side.
The rear wheel is steered by a hydraulic cylinder slaved to a headstock mounted master cylinder. Complete and precise steering control is achieved with a minimum of wearing parts for a long and trouble free service life. A pair of large capacity accumulators cushions shock loads on the steering system allowing the operator to even back over dead furrows without worry.
Multiple Moldboard Options
V Slastted Moldboard
HC Slatted Moldboard
The N bottom with a cylindrical front and helicoidal rear offers high versatility with a low draught requirement. Giving a well formed plow furrow, the H bottom is well adapted to heavy clay soils. The Slatted V comprises independent and interchangeable slats. The slats serve to reduce blocking in sticky soil conditions.
Variable Width System
Available exclusively from Kuhn, the variable width mechanism is enclosed inside the plow beam. All linkages and pivot points are in this way protected from damage and wear caused by impact, dirt and corrosion.
Depth and Steering Control
In the work position, the wheel works “on land” for optimal performance and minimum soil compaction. The wheel is situated on the end for the best possible weight distribution and increased traction at the tractor wheels. In the transport position the width is limited to an easy to manage 8.2’. The rear wheel is steered hydraulically by the headstock to follow all tractor maneuvers.
|Number of bodies||4.7|
|Maximum authorised tractor power (kW)||155|
|Maximum Authorised Tractor Power (hp)||240|
|Safety||Non Stop Hydraulic|
|Plowing width (inches)||11 to 22|
|Underbeam clearance (cm)||87|
|Underbeam clearance (inches)||34.25"|
|Point-to-point clearance (cm)||115|
|Point-to-point clearance (inches)||45"|
|Beam section (mm)||220|
|Beam section (inches)||8.5"|
|Type of bodies||Any classic type|