Kuhn TDH 8315-19
The KUHN Krause 8315 tandem disc harrow offers a choice between 24’’ or 26’’, ¼’’ thick Residue Razor™ disc blades spaced 9’’ or 10’’ apart on the front gang and 10’’ apart on the rear gang. Heavy-duty, ductile iron spools with a 7” diameter bell multiply the strength of the gang. The 22-degree gang angle on the front and 19-degree gang angle on the rear allow for optimum residue cutting and mixing in primary tillage conditions.
Residue Razor™ disc blades are engineered to provide long wear life and sharpness - up to 5 times sharper than conventional blades.
Single-Point Depth Control
Adjust working depth across the entire disc from a single location with just one convenient crank at the front of the disc. Fine tune depth using the indicator decal - five turns changes the operating depth by one inch. Return to the same depth after each pass or change depth in the field in a matter of seconds.
Standard on all KUHN Krause 8315 disc harrows, heavy-duty walking beams with new metric tires allow for consistent working depth on rough ground and more stable road transport. Walking beams have slip-in spindles and heavy-duty hubs. Walking beam pivots require no daily grease maintenance or adjustment for preload.
No Daily Grease Maintenance
PEER® TillXtreme™ bearings, incorporated into disc gang assemblies, require no daily grease maintenance. An exclusive, KUHN Krause two-piece, nylon outer ring absorbs shock loads and helps center the bearing within the housing, preventing bearing preload and premature failure of the disc gang bearing.
|Working width (m)||6|
|Working width (feet)||19' 10"|
|Number of discs||between 52 and 50|
|Disc diameter (cm)||between 61 and 66|
|Disc diameter (in)||24" or 26"|
|Disc Spacing (cm)||between 22,9 and 25,4|
|Disc Spacing (in)||9" or 10"|
|Number of wheels||8|
|Number of bearing arms||16|
|Transport width (m)||3.7|
|Transport width (feet)||12' 2"|
|Transport Height (m)||3.3|
|Transport Height (feet)||10' 9"|
|Number of sections||3|
|Weight (kg)||between 5329 and 5590|
|Weight (lb)||between 11750 and 12324|
|Tractor Power (kW)||between 113 and 141|
|Tractor Power (hp)||between 152 and 190|