Land Pride RC4015
|All Land Pride Rotary Cutters have been designed and tested and meet rigorous
voluntary testing procedures.
|Factory assembled||Arrives for quick and easy set-up. Minimal time is wasted setting or prepping the unit.|
|7 Year gearbox warranty*||Shows confidence in gearbox integrity.|
|250 HP Divider gearbox
and 210 HP wing gearboxes
|They are rugged heavy built gearboxes capable of handling heavy cutting applications.|
|Gearbox seal protection||Gearbox bottom seal protection for longer bearing life.|
|Smooth Top Design||Allows for easy cleaning of deck.|
|Low tongue weight||Ideal for smaller HP tractors by reducing the amount of weight on the drawbar.|
|Narrow tongue construction||Allows for a tighter turning radius.|
Cat. 6 CV or Cat. 5 Conventional
|Driveline is matched just right for capacity of tractor. Constant velocity (CV) U-joint
allows for 80 degree turns without doing damage to the driveline.
|Cat. 5 intermediate & Cat. 4 wing
drivelines with slip-clutches
|Driveline is sized right for the intended cutting capacity. Slip-clutch will slip under load
instead of twisting the driveline.
|Slip-clutch drivelines||Slip-clutches are designed to slip to minimize twist damage to the driveline profiles.|
|High blade tip speed (See
Specifications for actual FPM)
|Allows clean cutting of material.|
|6" Blade overlap||Eliminates skipping during turns.|
|Left wing rotates clockwise||Better discharge of material. Picks up tractor tracks.|
|3/16" Round stump jumper||Standard thick stump jumper material keeps damage to a minimum.|
|1/4" Sidewall thickness||Increased thickness reduces damage from objects being thrown into deck sidewalls.|
|Self-leveling hitch||Reduces drawbar wear by keeping hitch level while going through ditches.|
|Hinged wing sections||Allows cutter to follow terrain. Ideal for rough ground where hillsides, ditches and
hollows can cause uneven cutting.
|1" Solid hinge rods||Larger diameter hinge rod gives greater strength to the cutter from front to rear, and in
the hinge area itself.
|Wing transport locks||Wing transport locks securely hold the wings in the folded position in case of hydraulic
|Enclosed front to rear dual
|Dual leveling rods enable the cutter to pull equally on the rear axle during travel over
|5-Bolt hubs||5-Bolt hubs makes the wheel assembly more durable and longer lasting.|
|Spring cushioned center-axle||Protects unit from bumps and ground shock.|
|Replaceable wheel spindles||Wheel spindles can be replaced when damaged without replacing entire axle
|Wheel options||Laminated tires: Eliminates flats.
Airplane tires without foam filling: Give better cushion while transporting.
Airplane tires with foam filling: Give better cushion while transporting and can’t go
|Double swivel hitch option||Great for uneven terrain, reduces drawbar wear. Hitch pivots freely up and down and
pivots about the tractor drawbar.
|Bar-tite hitch option||Ideal for extreme conditions. Clamps tight to drawbar eliminating drawbar wear.|