Land Pride RBT6012

Double tap to zoom

 

Features

FEATURES BENEFITS
Cat. II and Cat III 3-Point Hitch Can go from Cat. II to Cat. III 3-point tractor. Enables a wider variety of tractors to be used.
Blade angles left and right up to 45 degrees hydraulically Allows the operator to set the blade at the angle of his choice to complete the job with satisfactory results.
Blade offsets left and right up to 55” hydraulically Allows the operator to position the end of the moldboard beyond tractor tire and close to solid obstacles such as fences, buildings and abutments.
Blade tilts up and down up to 15 degrees hydraulically Allows the operator to do simple tasks such as putting a crown in the middle of a road to making V-type ditches of various sizes.
Mainframe is fully welded and reinforced Overall Mainframe strength is enhanced due to being fully welded.
Heavy-duty pivot assembly with 4 1/2” Diameter solid steel moldboard kingpin 1” Plate steel turntable and 4 1/2” King pin for handling high torque in this area
Formed 19” high moldboard Can move a great deal of material in a short time.
1/2” Formed Moldboard with 3/8” formed channel reinforcement Makes it one of the strongest moldboards in its class for handling heavy loads.
Retractable parking stand Enables one person hook-up and keeps the mainframe off of the ground.
Front pivot shaft has two grease points Helps front pivot shaft to move easily.
Heavy-duty blade pivot assembly 1” Plate steel turntable and 4 1/2” kingpin handle tremendous torque delivered by up to 225 HP tractors.
Skid shoes (optional) Skid shoes protect moldboard from hitting low lying obstructions such as manhole covers.
End plates (optional) End plates allow the blade to hold material in to drag from one spot to another.
Dual gauge wheels (optional) Gauge wheels position the height of the blade to aid in grading.

Specifications

Model RBT6015
Blade Width 12 ft.
Weight Without Gauge Wheel 2400 lbs
With Gauge Wheel 2600 lbs
Max. Tractor Hp 2-Wheel drive: 175 HP
4-Wheel Drive: 160 HP
Maximum G.V.W. (lbs.) 15,000
Hitch Type Cat. II & III (Quick Hitch Adaptable)
Blade Angle, Hydraulic Operated Up to 45 degrees clockwise and counterclockwise
Angle Cylinder With blade facing forward or reversed
Blade Offset, Hydraulic Operated 5" X 18" stroke with 2 1/2" dia. rod
Offset Cylinder Up to 55" left and right
Blade Tilt, Hydraulic Operated Should not offset when backing-up
Tilt Cylinder 5" X 18" stroke with 2 1/2" dia. rod
Moldboard King Pin Diameter Maximum 15° up and 15° down with blade facing forward or reversed
Moldboard Height 3 1/2" X 8" stroke with 1 1/2" dia. rod
Moldboard Thickness and Reinforcement 4 1/2" Diameter solid steel bar
Cutting Edge 1/2" x 6" grader blade Heat treated
Mainframe Construction Fully enclosed welded, formed box
Parking Stand Retractable
Accessories Skid Shoes, End Plates, Hydraulic Dual Gauge Wheel.