Land Pride SBD35108

Double tap to zoom

 

Features

Features Benefits
Quality heavy-duty gearbox Durable construction provides long life.
Two position hitch vertically Helps reduce driveline angularity issues when raising the 3 Point arms up.
Allows lower 3 point arms to be positioned more parallel to the ground when in operation.
Top holes in lower clevis make the units quick hitch compatible.
Adjustable hitch horizontally HItch can be extended forward for standard 540 rpm without Quick Hitch.
Hitch can be adjusted back for standard 540 rpm with Quick Hitch.
Hitch can be extended forward for optional 1000 rpm gearbox without Quick Hitch.
Hitch can be adjusted back for optional 1000 rpm gearbox with Quick Hitch.
Large main housing with dual
augers
Dual augers are capable of making 40" high cuts through large snow drifts.
2 1/2" x 3/8" Auger flight Auger is built heavy-duty to handle heavy work.
Large impeller diameter Has the ability to move and throw large amounts of material farther.
Hard steel bolt-on reversible
grader blade
Bolt-on blade can be replaced before auger housing becomes exposed to wear. Hardened
steel blades last longer and because the blade is reversible, it can be flipped over to
double the blade’s life.
Hydraulically gear driven
chute rotator
Gives the operator the ability to change direction snow is being blown using a hydraulic
control lever, without having to get out of the cab.
Shearbolt protected gearbox,
drive shaft, impeller, and
auger
Eliminates costly repairs.
Greaseable bearings Less drag and extends life of unit.
Skid shoe wear surfaces are
constructed of AR400 steel
AR400 steel last longer than mild steel.
Skid shoes are replaceable Bolt-on skid shoes can be replaced before auger side plates become exposed to wear.
Skid shoes and adjustable They can be adjusted to carry the Snow Blower above loose gravel and crushed rock or
set to remove snow close to surfaces such as asphalt and concrete.
Options
Two skid shoe options Multiple surfaces allows you to pick the correct skid shoe for your application.
Hydraulically controlled
deflector
Gives the operator the ability to change distance snow is being blown from the discharge
chute using a hydraulic control lever, without having to get out of the cab.

Specifications

Model No. SBD 35108
Tractor Horsepower 120-180 HP
Working Height 40"
Working Width 108"
Overall Width With Outer Skid Shoe Option 113 1/2"
Weight: Includes Hydraulic Deflector Cylinder and Excludes Skid Shoes 1,964 lbs
PTO Speed 540 rpm Optional 1000 rpm
3-Point Hitch Category Cat. ll & lll
Hitch Adjustment 2 Position
Quick Hitch Compatible Yes 
Main Housing Material 3/16"
Side Plate Material 1/4"
Grader Blade Bolt-on, reversible, and replaceable hardened steel full length
Chute Opening At Base 15 5/8"
Chute Rotation 220 Degrees (Hydraulically driven sprocket)
Impeller Housing Depth 12 3/8"
Impeller Diameter 34"
Number of Impeller Blades 4
Auger Diameter 16"
Auger Flighting 3/8" x 2 1/2" (Before rolling)
Number of Paddles Per Auger 4
Gearbox Oil Capacity & Type 5.28 Pints of SAE 90W Gearlube
Drive Chain #80 RC
Driveline Category Cat. 5, Shearbolt protected
Driveline Shearbolt Size M10 x 1.5 x 60 GR8.8
Drive Shaft Shearbolt Size 1/4" -20 Grade 5 bolt
Optional Equipment  
1000 RPM Reduction Box Yes
Bolt-on Outer Skid Shoes Side mounted with AR400 wear surfaces, adjustable & replaceable (32 lbs)
Bolt-on Inner Skid Shoes In-board mounted on the rear with AR400 wear surfaces, adjustable & replaceable. (19 lbs)
Deflector: Manual Standard with manual locking bar (2 lbs)
Deflector: Hydraulic Hydraulic cylinder (32 lbs)