Landoll 2211-15

Double tap to zoom

 

Features

  • Laser Cut, Robotically Welded Frame
  • 5 1/2” Lift Axles with Maintenance-Free Lift System
  • Walking Tandems on All Sizes
  • Slip-In Spindles
  • 12.5L x 15-12 Ply or 380/55R x 16.5 x 12 Tires (Model Dependent)
  • Self-Leveling Hitch
  • Cast Single Lip Hitches Cat. III on 9 and 11 Shanks; Cat. IV on 13 and 15 Shanks
  • Single Point Depth Control
  • 24” x 1/4” Disc Blades Spaced at 10 1/2”
  • Heavy-Duty Scrapers
  • 1 3/4” Gang Bolt
  • Trunnion Mount Bearings
  • C-Cushion Bearing Mounts
  • Hydraulic Disc Gangs (Front and Rear Gangs Operate on Single Remote Circuit)
  • Overlapping Front Disc Gangs
  • Staggered Shank Arrangement
  • Auto-Reset Shanks with 32” Under Frame Clearance
  • Choice of Chisel or Ripper Shank Legs
  • Choice of Chisel or Ripper Points
  • Adjustment/Maintenance Wrenches
  • Blue Powder Coat Paint
  • Safety Warning Lights

Specifications

Model 2211-15
Approximate Weight 21,560 lbs. (9,779 kg)
Working Width 18 ft. 9 in. (5.7 m)
Transport Width 18 ft. 11 in. (5.8 m)
Transport Height 14 ft. 0 in. (4.3 m)
Front Gang Width 18 ft. 6 in. (5.6 m)
Rear Gang Width 21 ft. 4 in. (6.5 m)
Number of Disc Blades - Front 24
Number of Disc Blades - Rear 26
Blade Spacing - Front 70.00%
Blade Spacing - Rear 10.5 in. (267 mm)
Blade Size 10.5 in. (267 mm)
Blade Scrapers 4.5 in. (114 mm)
Blade Scraper Mount Heavy-Duty 0.5 in. (12.7 mm) Spring Steel Arm
Gang Spools - Front 5.5 in. (140 mm) Diameter
Gang Spools - Rear 5.5 in. (140 mm) Diameter
Gang Angle - Front 14 or 18 Degrees
Gang Angle - Rear 12 or 16 Degrees
Gang Shaft 1.75 in. (44.5 mm) Round
Number of Gang Bearings - Front 6
Number of Gang Bearings - Rear 6
Gang Bearing Type C-Cushion Trunnion Mount, Greaseable Triple Lip Seals
Number of Shanks 15
Shank Spacing 15 in. (381 mm)
Shank Mounts Integral Frame Mounts
Point Load - Auto Reset 1,750 lbs. (794 kg)
Trip Height 14 in. (356mm)
Under Frame Clearance 32 in. (813 mm)
Chisel Shank Size 1.25 in. x 2.5 in. (31.8 x 63.5 mm)
Auto-Reset Ripper Shank Size 1.25 in. x 3.0 in. (31.8 x 76.2 mm)
Standard Points - Chisel Shank Reversible Point
Standard Points - Auto-Reset Shank V-Cap Chrome Point
Frame 8 in. x 4 in. x 0.375 in. (203 x 102 x 9.5 mm) and 6 in. x 4 in. x 0.375 (153 x 102 x 9.5 mm)
Frame Construction Laser Cut/Matchcut Components, Robotically Welded
Transport Lift Axles 5.5 in. (140 mm) with UHMW Maintenance Free Pivots
Transport Axle Type Walking Tandems with Greaseable Pivots
Tire Size (4) 380/55R x 16.5-12
Wheel Hubs 8-Bolt
Spindles 3 in. (76.2 mm) Slip-In Spindles
Hitch Type Self-Leveling with Manual Adjustment
Hitch Category Cat. IV Single Lip with 2.25 (57.2 mm) Hole
Machine Depth Control Single Point, Front Mounted
Safety Warnings Lights and SMV Emblem Standard
Safety Chain Kit Standard
Adjustment Wrenches Standard
Powder Coat Paint, Blue Sapphire Standard
Rear Jack Standard, When Equipped with Chopper Reel
Cat. III Single Lip Hitch Clevis (2 in. Hole) Optional
Cat. IV Single Lip Hitch Clevis (2.25 in. Hole) Standard
Cat. V Single Lip Hitch Clevis (3 in. Hole) Optional
Shark Fin Point (Ripper Shanks) Optional
2 in. Chrome Cap Point (Chisel Shanks) Optional
Spare Tire & Wheel Assembly Optional
Horsepower Requirements 30 to 40 HP (22 to 30 kW) per Shank