Landoll 2430-13-24

Double tap to zoom

 

Features

  • Laser Cut, Robotically Welded Frame
  • 5 1/2” Lift Axles with Maintenance-Free Lift System
  • Walking Tandems on All Sizes
  • Slip-In Spindles
  • 12.5L x 15-12 Ply, 380/55R x 16.5 x 12 Ply, 440/55R x 18 x 14 Ply Tires (Model Dependent)
  • Self-Leveling Hitch
  • Cast Single Lip Hitch Cat. IV (2 1/4” Hole)
  • Single Point Depth Control
  • 24” or 26” x 1/4” Disc Blades Spaced at 10 1/2”
  • 15 Degree Gang Angle Front and Rear
  • Heavy-Duty Scrapers
  • 1 3/4” Gang Bolt
  • Trunnion Mount Bearings
  • C-Cushion Bearing Mounts
  • Overlapping/Staggered Offset Tandem Disc Gangs
  • Staggered Shank Arrangement
  • Auto-Reset Shanks with 3,500 lb. Point Load
  • Choice of Points with Integral Wear Strips
  • Adjustment/Maintenance Wrenches
  • Blue Powder Coat Paint
  • Safety Warning Lights

Specifications

Model 2430-13-24 
Approximate Weight 29,870 lbs. (13,549 kg)
Working Width 26 ft. 0 in. (7.9 m)
Transport Width 16 ft. 0 in. (4.9 m)
Transport Height 14 ft. 0 in. (4.3 m)
Number of Disc Blades - Front 32
Number of Disc Blades - Rear 34
Blade Spacing - Front 10 in. (267 mm)
Blade Spacing - Rear 10 in. (267 mm)
Blade Sizes 24 in. x 0.25 in. (610 x 6.4 mm) Rollable
  24 in. x 0.25 in. (610 x 6.4 mm)
  26 in. x 0.25 in. (660 x 6.4 mm)
Blade Concavity 3 in. (76.2 mm)
Blade Scrapers 4.5 in. (114 mm) Adjustable
Blade Scraper Mount Heavy-Duty 0.5 in. (12.7 mm) Spring Steel Arm
Gang Spools - Front 5.5 in. (140 mm) Diameter
Gang Spools - Rear 5.5 in. (140 mm) Diameter
Gang Angle 15 Degrees Non- Adjustable
Gang Shaft 1.75 in. (44.5 mm) Round
Number of Gang Bearings - Front 10
Number of Gang Bearings - Rear 10
Gang Bearing Type C-Cushion Trunnion Mount, Greaseable Triple Lip Seals
Number of Shanks 13
Shank Spacing 24 in. (610 mm)
Shank Depth (Maximum) 16 in. (406 mm)
Shank Mounts Semi-Wrap Around with 1 in. (25.4 mm) U-bolts
Point Load - Auto Reset 3,600 lbs. (1633 kg)
Trip Height 16 in. (406 mm)
Shank Size 1.25 in. x 4 in. (31.8 x 102 mm)
Shank Type Auto-Reset Parabolic
Standard Points 2.375 in. (60.3 mm) V-Cap with Wear Guard
Frame 8 in. x 4 in. x 0.375 in. (203 x 102 x 9.5 mm) and 6 in. x 4 in. x 0.375 (153 x 102 x 9.5 mm)
Frame Construction Laser Cut/Matchcut Components, Robotically Welded
Transport Lift Axles 5.5 in. (140 mm) with UHMW Maintenance Free Pivots
Transport Axle Type Walking Tandems with Greaseable Pivots
Tire Size - Main Frame (4) 440/55R x 18-14
Wheel Hubs - Main Frame 8-Bolt
Spindles - Main Frame 4 in. (102 mm) Slip-In Spindles
Tire Size - Wing Frame (4) 12.5 L x 15 Hwy Service Tires (Load F)
Wheel Hubs - Wing Frame 8-Bolt
Spindles - Wing Frame 2.25 in. (57.2 mm) Slip-In Spindles
Hitch Type Self-Leveling with Manual Adjustment
Hitch Category Cat. IV Single Lip with 2.25 (57.2 mm) Hole
Machine Depth Control Single Point, Front Mounted
Safety Warnings Lights and SMV Emblem Standard
Safety Chain Kit Standard
Adjustment Wrenches Standard
Powder Coat Paint, Blue Sapphire Standard
Rear Jack Standard
Cat. III Single Lip Hitch Clevis (2 in. Hole) Optional
Cat. V Single Lip Hitch Clevis (3 in. Hole) Optional
Shark Fin Point Optional
7 in. Wing Point Optional
Spare Tire & Wheel Assembly Optional
Horsepower Requirements 40 to 50 HP (30 to 27 kW) per Shank