Landoll 7431-23

Double tap to zoom

 

Features

  • Laser Cut, Robotically Welded Frame
  • 5 1/2” Lift Axles with Maintenance-Free Lift System
  • Walking Tandems on All Sizes (Single Wheel on Wing of 20 Foot)
  • Slip-In Spindles
  • 12.5L x 15 (GY-FI) Load Range F, 380/55R x 16.5, 32/1550 x 16.5 SL, 235/75R 17.5 Tires (Model Dependent)
  • Self-Leveling Hitch (Hydraulic Control Optional on 3 Section, Standard on 5 Section)
  • Cast Single Lip Hitch Cat. III or Cat. IV  (Model Dependent)
  • Single Point Depth Control
  • Pivoting Wing Gauge Wheels on All Models
  • 22” 6 Gauge or 1/4” Disc Blades Spaced at 7” on All Models
  • 10 Degree Gang Angle Front and Rear
  • 1 3/4” Gang Bolt
  • Solid 5 1/2” Cast Iron Spools of Front Gang
  • Steel Spools 5 1/2” Diameter with 1/4” Wall Thickness on Rear Gang
  • Trunnion Mount Bearings
  • C-Cushion Bearing Mounts
  • Overlapping/Staggered Offset Tandem Disc Gangs
  • Heavy-Duty Adjustable Scrapers
  • Adjustment/Maintenance Wrenches
  • Blue Powder Coat Paint
  • Safety Warning Lights

Specifications

 Model 7431-23
Approximate Weight 18,135 lbs. (8,226 kg)
Working Width 23 ft. 6 in. (8.1 m)
Front Gang Cut 22 ft. 0 in. (6.7 m)
Transport Width 13 ft. 7 in. (4.1 m)
Transport Height 11 ft. 6 in. (3.5 m)
Number of Blades - Front Gang 40
Number of Blades - Rear Gang 42
Blade Diameter 22 in. (559 mm)
Blade Thickness 0.25 in. (6.35 mm)
  0.25 in. (6.35 mm) Rollable
  6 ga. (4.86 mm)
Blade Concavity Low Concavity
Blade Spacing - Front Gang 7 in. (178 mm)
Blade Spacing - Rear Gang 7 in. (178 mm)
Blade Scrapers 4 in. (102 mm) Adjustable
Blade Scraper Mount Heavy-Duty 0.5 in. (12.7 mm) Spring Steel Arm
Gang Spools - Front Gang 5.5 in. (140 mm) Diameter Solid Cast
Gang Spools - Rear Gang 5.5 in. (140 mm) Diameter 0.25 in. (6.35 mm) Wall Weldment
Gang Angle 10 Degree
Gang Shaft 1.75 in. (44.5 mm) Round
Number of Gang Bearings - Front 10
Number of Gang Bearings - Rear 10
Gang Bearings C-Cushion Trunnion Mount, Greaseable Triple Lip Seals
Frame 6 in. x 6 in. x 0.375 in. (153 x 153 x 9.5 mm) and 4 in. x 6 in. x 0.25 in. (102 x 153 x 6.35 mm)
Frame Construction Laser Cut/Matchcut Components, Robotically Welded
Transport Lift Axles 5.5 in. (140 mm) with UHMW Maintenance Free Pivots
Transport Axle Type - Main Frame Walking Tandems with Greaseable Pivots
Transport Axle Type - Wing Frame Walking Tandems with Greaseable Pivots
Tire Size - Main Frame (4) 12.5L x 15 (GY-FI) Load Range F
Wheel Hubs - Main Frame 8-Bolt
Spindles - Main Frame 2.25 in. (57.2 mm) Slip-In Spindles
Tire Size - Wing Frame (4) 12.5L x 15 (GY-FI) Load Range F
Wheel Hubs - Wing Frame 8-Bolt
Spindles - Wing Frame 2.25 in. (57.2 mm) Slip-In Spindles
Hitch Type Self-Leveling with Hydraulic Control
Hitch Category Cat. III Single Lip with 2.0 in. (50.8 mm) Hole
Finishing Device Standard
Finishing Device Type 15 in. (356 mm) Diameter Chevron Design Reel
Rod Diameter 0.875 in. (22.2 mm)
Number of Mounting Arms 2 Per Section
Reel Protection Adjustable Spring Loaded Down Pressure
Reel Bearings C-Cushion Trunnion Mount, Greaseable Triple Lip Seals
Machine Depth Control Single Point, Front Mounted
Wing Gauge Wheels - Swivel Type (2) Standard
Safety Warning Lights and SMV Emblem Standard
Safety Chain Kit Standard
Adjustment Wrenches Standard
Powder Coat Paint, Blue Sapphire Standard
Manual Leveler Crank Adjustment NA
Hydraulic Reel Control Optional
Rear Hitch With Hydraulic Hoses Optional
Cat. IV Single Lip Hitch Clevis (2.25 in. Hole) Optional
Double Lip Hitch Clevis (1.563 in. Hole) Optional
Spare Tire & Wheel Assembly Optional
Horsepower Requirements 8 to 10 HP (6 to 7 kW) per Foot