Landoll 850-35

Double tap to zoom

 

Features

  • Laser Cut, Robotically Welded Frame
  • T-Type Self-Leveling Hitch
  • 7 1/2 Degree Wing Float Up and Down
  • Rock Flex Disc Bearing Standards
  • Mechanical Ratchet Depth Adjustment
  • 20” Low Concavity Disc Blades Spaced at 7 1/2”
  • 8 Degree Gang Angle
  • Spring Clamp Shanks with 150 lbs. Point Load
  • 140 lbs. Point Load on S-Tine Shanks
  • Edge Bent Shanks
  • True 8” Shank Spacing
  • Out-Rigger Gauge Wheels on 3 Section Models
  • Yellow Powder Coat Paint
  • Safety Warning Lights

Specifications

Model 850-35
Approximate Weight 15,500 lbs. (7,031 kg)
Working Widtd 35 ft. 4 in. (10.8 m)
Transport Widtd 17 ft. 4 in. (5.3 m)
Transport Height 16 ft. 4 in. (5.0 m)
Number of Shanks 53
Shank Type Spring Clamp, Edge Bent Shank
Shank Size 0.5625 in. x 1.75 in. (14.3 x 44.5 mm)
Point Load 150 lbs. (68 kg)
Shank Spacing 8 in. (203 mm)
Under Frame Clearance 25.5 in. (648 mm)
Sweeps 10 in. (254 mm)
Number of Blades 56
Blade Diameter 20 in. (508 mm)
Blade tdickness 0.197 in. (5.0 mm)
Blade Concavity Low Concavity
Blade Spacing 7.5 in. (191 mm)
Reversible Blade Scrapers 4 in. x 0.179 in. (102 x 4.5 mm)
Gang Protection Rock Flex Mount
Gang Spool 3.5 in. x 3.0625 in. (89 x 78 mm)
Gang Angle 8 Degree
Gang Shaft 1.5 in. (38.1 mm)
Gang Bearings 1.5 in. (38.1 mm) Flange Type Greaseable
Frame 6 in. x 2 in. x 0.25 in. (153 x 50.8 x 6.4 mm) and 4 in. x 3 in. x 0.25 in. (102 x 76.2 x 6.4 mm)
Frame Construction Laser Cut/Matchcut Components, Robotically Welded
Transport Lift Axles 4.5 in. x 0.25 in. (114 x 6.4 mm)
Wing Axles Walking Beams
Walking Tandems Standard
Wing Flex 7.5 Degrees Up/Down
Tire Size - Main Frame (4) 11L x 15-10 Ply
Wheel Hubs - Main Frame 8-Bolt
Spindles - Main Frame 2.125 in. (54.0 mm) Slip-In Spindles
Tire Size - Wing Frame (4) 9.5L x 15-8 Ply
Wheel Hubs - Wing Frame 6-Bolt
Spindles - Wing Frame 2 in. (50.8 mm) Slip-In Spindles
Hitch Type Self-Leveling witd Manual Adjustment
Hitch Category Cat. III Single Lip
Machine Deptd Control Adjustment Rod
Outrigger Gauge Wheels Standard
Safety Warning Lights and SMV Emblem Standard
Safety Chain Kit Standard
Powder Coat Paint, Yellow Standard
10 in. Ultra Wing Sweeps Optional
Hydraulic Gang Adjustment Optional
Walking Tandems Standard
Rear Hitch Optional
Attachment Options:  
5-Bar Spike Flex Harrow Optional
3-Bar Spike Witd Roller Optional
4-Bar Spring Tine Harrow Optional
3-Bar Spring Tine Witd Roller Optional
Horsepower Requirements 8 to 10 HP (6 to 7 kW) per Foot