Meyer Farm 9524 Pull Type
- The Swing Arm Style Tailgate also features a Bypass Valve for your protection. The apron will not operate until the tailgate is in the fully open position. This feature protects your spreader and limits the hydraulic outlet requirements on your tractor!
- This Belting Deflector is standard equipment with the swing arm tailgate. It reduces kickback of rocks and frozen manure when using the vertical attachment.
- Hinged Stake System for easy attachment removal. As you lift on the upper lift tabs, the attachment hinges out and lifts out of the stakes.
- High-Efficiency Berma 800 Series apron gearbox to pull the load. This gear-to-gear design is simple and strong! It is outfitted with the Meyer Hydraulic Variable Speed Control.
- Massive Expeller Driveline features a center drive design for reduced stress. (S-100 / S-200) Massive bevel gearbox design makes others look small!
- Attachment Driveline No-Tool disconnection! Unhooks just like a tractor PTO.
- Massive formed channel floor supports. Only 7” gap between supporting crossmembers!
- Solid-poly floor with Triple 667XH Aprons – 180,000# combined tensile! Variable Speed Apron Drive is Standard on all Models!
- The PTO Driveline features a standard constant velocity - 1 ¾” 20 spline yoke, overrunning clutch and torque disconnect clutch to protect your expeller drive system. The pto bearing tower is rubber mounted to reduce vibration.
|Dimensions/Specs.||9524 Pull Type|
|Box Inside Length||24'|
|Overall Length||36' 5" w/XTS3000 600/50|
|Overall Width-Box/Box w/Tires||102"/111"|
|Overall Height w/S-200||12' 1" x/XTS3000 600/50|
|Capacity-Heaped||720 / 925 Cu. Ft.|
|Loading Height||9' with trailer|
|Weight (approx.) w/S-200||19,760# w600/50x22.5|
|Min. Required HP||220 HP|
|Chassis (see specs below)||60,000# Capacity Tandem-Non Steer|
|Tires||600 50x22.5 Tires|
|Slats Per Apron||37/111 Per Box|
|Apron Drive||Hydraulic - Variable|
|Box Sides||Steel - 10 gauge|
|Front 36" Folding Guard Deflect||Standard|
|Transport Lights w/Cord||Standard|
|Rear Attach S-100/200/300/400||Optional|
|Silage Extension Package||Optional 36"|
|Nutrient Tracking M.S.||Optional|
|Reversing Apron Pkg.||Standard|
|Rear Attachments:||S-300 / Horizontal|
|PTO Speed (RPM)||1000 RPM|
|PTO Protection Cutout Style||Standard|
|Vertical Expellor Diameter||N/A|
|Horizontal Beater Diameter||3 standard /
|Gate Style||Swing Arm Style|
|Trailers (Pull Type)||XTSW3000|
Non steer - STD
Steerable - OPT
|30,000# x 2 - high
|Sliding Spring Suspension|
|Hub||Oil Bath - 10 Bolt|
|Articulating Implement Hitch||Std - Requires
1.5 or 2" pin
Hammerstrap style hitch
|Tire Options:||600/50x22.5 high floatation|
new truck tires
dual truck tires
|Brakes (air,hyd or foot pedal)||Optional|