Double tap to zoom
Bars are 4-5 times stronger torsionally than angle type bars of same size. We’ve bolted them to the chain which is stronger and for different bale types blank bars or bars with more aggressive teeth are available and can simply be bolted on in a matter of minutes.
Zinc plated chains rated to 24,000lbs with the larger diameter rollers and pins make our chain drive system almost twice as strong as our competitors. And the greater surface on each roller pin increases chain life because they can’t stretch of snake.
Low maintenance bearings
Protected double sealed heavy-duty 4-bolt bearings with trash shields are mounted outboard of the feeding chamber, which makes them last longer than internally mounted bushes.
Our 6 tooth sprockets are made from Bisalloy (the same material a bulldozer blade is made from) so they last forever. With smaller diameter sprockets less torque is required to drive the chains, giving more drive power for tough bales. Designed so it is impossible for chain to jump off the sprocket saves you downtime in the field. The chain runs on a roller at the main elevator pivot, eliminating any further chain wear.
The LM105T bale unroller bunk bale feeder has a dual latch system for superior rigidity and safety with locking device.
The raised side stops feed falling off the elevator and being wasted. This is especially important when feeding out fine chopped silage or maize bales.
Large extension for maximum reach allows feeding out into hay baskets/cradles as well as troughs and feedpads.
Fully enclosed front and rear bale chamber reduces feed falling out. This also enables you to feed out maize bales or fine chopped silage.
The unique rope guide makes disconnection easy because of a direct pull of the rope on the latch. It also keeps the rope out of the way of the tractor tire.
Fully enclosed extruded polyethylene floor reduces feed waste and it will never corrode. Being polyethylene it is slippery with 30% less drag compared to steel which makes feeding sticky silage or wet bales easy.
Unequal length tines
Unequal length tines make connecting the feeder easy. You’ll only need to line up one tine, then back straight in.
Full width feet
Wide feet provide extra stability when not in use and stops the feeder sinking into wet or muddy ground.
Ultra low cradle
Ultra low cradle, makes loading bales easier.
|Bale round sizes:||4' X 4' - 6' X 5'|
|Bale weight:||Up to 1000kg|
|Capacity:||1x bale (round or square)|
|Hydraulics required:||2 X double-acting, 30-60 litres/min, 2250-3000 psi|
|Chains:||24,000lbs load rated roller chains|
|Size (L x W x H) with elevator in down position:||1979 x 2990 x 1084 mm|
|Size (L x W x H) with elevator in up position:||1979 x 2191 x 2151 mm|
|Size (L x W x H) with elevator in 45° position:||1979 x 2766 x 1363 mm|