
Features
Combi Float
Combi Float – the intelligent solution
Combi Float is a special feature on EasyCut B 1000 CV and EasyCut B 1000 CR with their huge 10.10 m (33'2") work widths and high performance CV or CR conditioner. The automatic and hydro-pneumatic Combi Float control system is a unique system that is not available elsewhere. It integrates the tractor‘s hydraulic system, thus making up for the shortcomings of hydro-pneumatic pressure control systems.
Combi Float is a unique system that offers plenty of benefits
- The automatic suspension control system maintains identical pressures on both wing mowers when they work in offset position and in undulating fields
- Easy adjustment of the mower suspension system from the tractor seat and on the move
- Lightweight, hardwearing, easy pulling and compact
Combi Float – only from KRONE: The speciality of the system is the fact that it uses extra spools and the circuit of the single-acting coupler with free return line to maintain the pressure inside the reservoirs of the hydro-pneumatic system. The advantage of this system is that it maintains a uniform suspension of both mowers in undulating terrain and when working at various work widths.
Forget about stripes
Nothing is left behind
- Hydraulic overlap adjustment
- Large setting range of up to 40 cm (1'4") per side
- Clean cuts in bends and on slopes
CV conditioner
V-shaped steel tines for higher intensity
- V-shaped steel tines at steep angles give strong and perfect conditioning
- The driveline without belts – frictional and low-maintenance
- Operator convenience from mechanical conditioner gearbox
- Adjustable baffle plates for enhanced conditioning
Specifications
Model | EasyCut B 1000 CV |
Work width approx. mm | 9.300 - 10.100 (30'6" - 33'2") |
Work width per rear mower approx. mm | 3.600 (11'10") |
Total transport width approx. mm | 2.950 (9'8") |
Storage height approx. mm | 4.200 (13'9") |
Transport height at 250 / 200 mm ground clearance approx. mm |
4.000 (13'2") |
No. of discs* | 12 |
No. of top hats* | 4 |
Quick-changing knives | Standard |
SafeCut | Standard |
Conditioner | V-steel tines |
Rotor diameter approx. mm | 640 (2'1") |
Conditioner speed rpm | 600 / 900 |
Cross conveyor belts | – |
Pto rpm | 1.000 |
Spools required | 1 sa and free return** |
Load-sensing | Standard |
Dead weight* approx. kg (lbs) |
3.400 (7,596) |
Power requirement kW/hp | 130 / 180 |
Area output min. approx. ha / h (acre) | 10 - 14 (25 - 35) |
*without front mower **or load-sensing