Double tap to zoom
FAST, UNIFORM CROP DRYING
Fast and Uniform Crop Drying and Distribution
For those whose goal is to harvest the highest quality crop – Small rotors are the key to success! Due to the steep pitch angle, small rotors offer many advantages, including a wide angle of attack while turning all of the crop, fast and uniform drying, complete crop inversion, even crop distribution, exceptional ground adaptation, minimum distance to the center of gravity on mounted tedders for reduced lift requirements, and reduced horsepower requirements.
When it comes to tines that actually engage the crop, KUHN leaves nothing to chance: top-quality raw material has been wound into four coils with long tine fingers, giving you exceptional reliability. A defined attachment system to the arms results in an unmatched design life of at least 180,000 cycles. This provides several hundred hours of work before tine replacement is necessary. Asymmetrical tine finger length means both fingers engage the crop equally for a more consistent pickup. The tine guards prevent accumulation of debris around the coils.
Asymmetrical Tine Length
The asymmetrical tine length with longer outer fingers has several advantage to bring the machine’s tedding quality to perfection. This allows the outer finger to touch the crop earlier compared to symmetrical tines. It also ensures more complete tedding, along borders and between the rotors, where the tines overlap more in this sensitive area. Contacting the crop sooner means that the actual working width of each rotor is expanded and as a result, the entire machine working width is expanded.
Quick Adjustment of Tine Angle
Whether in long or short, wet or dry crop, or different cutting heights, the pitch angle is adjusted without tools near the wheel supports. Always remember a steep pitch angle will decrease drying time and increase the nutritional value of the forage.
Headland Lift Control
Standard Headland Lift Control, on GF 1012 T Series tedders, makes the machine easy to lift and maneuver on headlands while limiting the introduction of foreign materials like dust into the forage. This is beneficial because the headlands do not need to be tedded twice. One hydraulic valve in the cab lifts all the rotors from the ground providing high ground clearance to pass over windrows (approx. 20”) and allows operators to easily turn on headlands or narrow areas.
PROVEN & RELIABLE COMPONENTS
DigiDrive® Coupling System – A Legend in the Making
When a KUHN engineer came up with this drive coupling design, we knew that it would revolutionize the rotary tedder. This patented design made it possible to reliably drive a large number of rotors, yet fold them for unmatched transport ease, all with virtually no maintenance or repairs. Since the DigiDrive coupling’s inception, nearly 20 years have passed and more than 150,000 KUHN tedders are now being used across the world to ted hay with the ultimate reliability.
The DigiDrive contains case-hardened forged steel fingers for improved wear resistance. Synchronization of rotational movement is outstanding both in work and in transport where the components are folded 180° to reduce the machine’s space requirement. The DigiDrive is a highly reliable system requiring very little maintenance – no daily greasing necessary!
Rotor Housings – Made to Last
With rotors driven by DigiDrive couplings and lubed-for-life rotor housings, the greasing points are limited to a relatively few pivot points allowing you to spend more time in the field and less time greasing.
1. They are supported by large diameter, double-row angular ball bearings.
2. The thoroughly sealed rotor housing prevents lubricant leaks or introduction contaminants.
The robust mounting of housings to the edge of the rectangular frame maximizes strength and durability.
The two outer sections of the tedder are held in place by straps. They are used to reduce stress on the main frame and rotor structures. This allows fastening to the rotor ends, keeping the two sections stable without any oscillation. The straps also double as safety guards, replacing the metal guards. When folding for transport, the two straps automatically wind up like a seat belt.
|SPECIFICATIONS||GF 10812 T|
|Working width DIN||35'5'' (10.8 m)|
|Overall width in operating position||36'9'' (11.2 m)|
|Number of rotors||10|
|Number of tine arms per rotor||6|
|Manual tine angle adjustment per rotor||Standard|
|Border control||Hydraulic offset border tedding|
|Transport width||9'10'' (3.0 m)|
|Transport height||10'10'' (3.3 m)|
|Transport length||15'9'' (4.8 m)|
|Hydrualic vertical folding||Standard|
|Automatic transport leveling||Standard|
|DigiDrive multiple finger drive coupling||Standard|
|PTO with torque limiter||Standard|
|PTO speed||540 rpm|
|Overruning PTO clutch||Standard|
|Tires on central rotors||18 x 8.50-8|
|Tires on outside rotors||16 x 6.50-8|
|Required tractor hydraulic connections||2 DA|
|Minimum PTO power requirement||55 hp (40 kW)|
|Frame dampener set||-|
|Road lights and signaling||Standard|
|Standard control box||KGF 01T|
|Machine weight, approx.||4,585 lbs (2,080 kg)|