Manure Scrapers
Mensch manure scrapers are used to scrape away manure quickly and easily. Getting right down to the ground the rubber edge cleans in as little as one pass. Made of durable industrial tires and attached to a sturdy 3 1/2 x 3 1/2 x 1/4 wall structural tubing frame, are scrapers are made to last. Rubber scrapers have many advantages over traditional steel blades
- Outlast steel blades
- Takes vibration out
- Gentle on concrete
- Cleans like a squeegee
- Reduce risk of injuring cattle
- Rubber blade does not rust
- Dipped in paint to provide additional protection from the elements
Custom sized to fit your Alleys
| M 500 3-Point | M 600 Bucket | M 700 Quick Tach | M 100 Rubber Base | M 150 w/Pullback | |
| Width | Models | ||||
| 5' - 5' 11" | M500-5 | M600-5 | M700-5 | M100-5 | M150-5 |
| 6' - 6' 11" | M500-6 | M600-6 | M700-6 | M100-6 | M150-6 |
| 7' - 7' 11" | M500-7 | M600-7 | M700-7 | M100-7 | M150-7 |
| 8' - 8' 11" | M500-8 | M600-8 | M700-8 | M100-8 | M150-8 |
| 9' - 9' 11" | M500-9 | M600-9 | M700-9 | M100-9 | M150-9 |
| 10' - 10' 11" | M500-10 | M600-10 | M700-10 | M100-10 | M150-10 |
| 11' - 11' 11" | M500-11 | M600-11 | M700-11 | M100-11 | M150-11 |
| 12' - 12' 11" | M700-12 | M100-12 | M150-12 | ||
| Standard Height | 20" | 15"-17" | 17"-20" |
Bucket Side-Shooters
Bucket Side-Shooters are designed to spread sand or sawdust into free stall barns, back fill, and can be used in many other applications. The bucket contains a positive drive conveyor that dispenses material from either side. From silage to stone the Mensch Side-Shooter shoots it all.
- Positive drive conveyor system
- Durable endless loop track
- Dispenses contents from either side
- Optional agitator to prevent bridging of material
- Track speed varies with engine RPM and is controlled with auxiliary valve control of loader
- Flow is controlled by adjusting shoot door
- 5/8" thick abrasive resistent steel bogie wheels
- Replacable bolt on cutting edge
- Easy conveyor bearing grease access
| Model | Width (ft) | Type | Capacity (yd) | Weight (lb) | Req Hyd Flow min (gpm) |
| M1000 | 5 | Sawdust | 1 | 1050 | 10 |
| M1050 | 5 | Sand | 0.5 | 800 | 10 |
| M1100 | 6 | Sawdust | 1.33 | 1180 | 11 |
| M1150 | 6 | Sand | 0.66 | 950 | 13 |
| M2100 | 7 | Sawdust | 1.5 | 1350 | 11 |
| M1450 | 7 | Sawdust | 2 | 1600 | 11 |
| M2150 | 7 | Sand | 1 | 1200 | 14 |
| M1250-1 | 7 | Sand | 1.75 | 1400 | 15 |
| M1250-2 | 8 | Sand | 2 | 2675 | 15 |
| M1300 | 8 | Sand | 3 | 2875 | 15 |
| M1400 | 8 | Sawdust | 4 | 3250 | 15 |
Trailer Side-Shooter
Simple Barn Design.
Trailer Side-Shooters are used to spread sand or sawdust in many applications including free stall barns. The trailer side-shooter uses a main conveyor to transfer the material to a cross conveyor that dispenses the material 3ft to 25ft.
Box
- 3/16" sides and ends
- Boxed vertical side braces
- Corner reinforcement
Axles
- Walking Beam
- Heavy duty wheel center
- Tires 11R 22.5
Main Conveyor
- AR 400 sprockets
- High torque planetary gearbox drive system
- 3/8" AR 400 steel top chain wear plate
- UWHM lower chain return
Other
- 12,000 lb Jack
- Hydraulic controlled tank door
- Self-contained hydraulics w/ reservoir just attach drive shaft to PTO
- 540 PTO standard, 1000 available
Cross Conveyor
- Oscillating conveyor
- Unloads in 2 1/2 minutes
- Spreads 3 - 25 ft
- Dispenses material from either side
- Aggressive positive drive belt
- 5/8" AR 400 steel wheels
Options
- Wireless remote control
- Flotation tires
- Vibrator
- Height extensions
| Model | Material | Struck | Heaped | Length | Width | Height | Tank Length | Side Angle | Chain Width | Empty Weight | ||||||||
| yd | (m) | yd | (m) | in | (cm) | in | (cm) | in | (cm) | in | (cm) | deg | in | (cm) | lb | (kg) | ||
| 3350 | Sand | 7 | (5.3) | 10 | (7.7) | 208 | (529) | 84 | (214) | 90 | (229) | 144 | (366) | 54 | 30 | (76) | 8075 | (3665) |
| 3355 | Sand / Sawdust | 8.5 | (6.5) | 11 | (8.4) | 208 | (529) | 87 | (221) | 99 | (252) | 144 | (366) | 68 | 36 | (92) | 8450 | (3835) |
| 3380L | Sawdust | 11.5 | (8.8) | 15 | (11.5) | 256 | (650) | 90 | (229) | 99 | (252) | 192 | (489) | 68 | 36 | (92) | 9080 | (4120) |
| 3380H | Sand / Sawdust | 11.5 | (8.8) | 15 | (11.5) | 256 | (650) | 90 | (229) | 99 | (252) | 192 | (489) | 68 | 36 | (92) | 11400 | (5170) |
| 3385 | Sand | 13 | (10) | 17 | (13) | 256 | (650) | 90 | (229) | 100 | (254) | 192 | (489) | 58 | 30 | (76) | 11400 | (5170) |
Truck Mount Side-Shooter
Truck Mount Side-Shooter are used to spread sand or sawdust in many applications including free stall barns. The Truck Mount Side-Shooter uses a main conveyor to transfer the material to a cross conveyor that dispenses the material 3ft to 25ft.
- Oscillating conveyor
- Unloads in 2 1/2 minutes
- Shoots 3-25 ft, depends on flow control, RPM speed, cross-conveyor angle, and material
- Dispenses contents from either side
- 3/16 steel box
- Optional remote control
- Triple sealed bearings on cross-conveyor
- Self-contained hydraulics w/ reservoir
| Single Axle Truck | Yard Capacity | ||
| T 3500-12 | 12' Truck Mount | 7-1/2 yd Struck | 6" Higher Box 9 yd Struck |
| Tandum Truck Axle | |||
| T 3500-16 | 16' Truck Mount | 10 yd Struck | 6" Higher Box 12 yd Struck |
Side-Shooter
Bed Quickly and Efficiently.
The Self Propelled SideShooter will decrease time needed to bed freestalls while reducing amount of material wasted from improper placement.
Independent Conveyor Speeds.
The operator can independently control each conveyor speed (main conveyor & cross conveyor) to accommodate many different bedding types and moisture content in the bedding. The conveyors can be adjust quickly and easily with the turn of a dial from inside the cab.
Excellent Visibility.
The positioning of the cab allows the operator to watch the cross conveyor, the main conveyor, and the material being spread.
Rugged Cab Construction.
The cab features military grade components for long service life. With no controls on the floor to be damaged by the corrosive manure and sand. The rugged cab is easily cleaned.
Cross Conveyor.
The cross conveyor uses an aggressive high speed track, this allows the conveyor to place bedding 3 to 25 feet. Also the track is seamless and fiberglass reinforced with positive drive cogs to provide rugged durability without slipping under load.
| Specs | M 3600 | M 3620 |
| Hopper Capacity Heaped | 15 cu. yd. | 20 cu. yd. |
| Operating Weight Empty | 18,500 lb. | 21,000 lb. |
| Operating Weight Loaded | 45,000 lb. | 65,000 lb. |
| Turning Circle | 7 ft | 12 ft |
| Wheelbase | 119 in. | 167 in. |
| Overall Length | 267 in. | 324 in. |
| Overall Height | 100 in. | 101 in. |
| Overall Width | 98 in. | |
| Engine | 160 hp | |
| Fuel Capacity | 60 Gallons | |
| Hydraulic Fluid Capacity | 25 Gallons | |
| Standard Tire Size | 385/65 R22.5 | 445/65 R22.5 |
| Parking Brake | Spring Applied Wet Disc | |
| Transmission | Hydrostatic | |
| Transfer Case | 2 Speed w/ High Range Lock Out | |
| Low Range Speed | 9 mph | |
| High Range Speed | 20 mph | |
| Discharge Distance | 3 ft. - 25 ft. | |
| Cab | Heat Standard / AC Optional |
Manure Vacuum
Simple Barn Design.
Barns no longer need to have an integrated manure handling system during construction. The Manure Vacuum replaces the need for pumps, augers, and concrete channels to transport manure from the barn to the storage lagoon or process facility.
Reduce Time Spent Cleaning Alleyways.
The Manure Vacuum cleans the alley in one pass. Allowing more time to properly fill and groom freestall bedding. In addition minimized time in the alleyway means reduced wear and tear on the equipment.
Rugged Durability.
The manure vacuum is manufactured from the highest quality of materials and components.
Reduce Expansion Cost.
With the manure vacuum, when a dairy expands their facilities there is no additional equipment to buy. The investment in the manure handling has already been made with a manure vacuum.
Flexible Farm Design.
With the ever changing regulations and restrictions manure systems are forced to change. The manure vacuum adapts to manure system changes.
Remote Manure Processing.
The location of a manure processing facilities is not limited to the ability to transfer the manure. The manure vacuum allows the transport of manure easily and reliably to anywhere on the dairy or even near by.
| Specs | V 2510 | V 3410 | V 4500 |
| Tank Capacity | 2200 gal. | 3000 gal. | 4300 gal. |
| Operating Weight Empty | 20,380 lb. | 21,600 lb. | 24,500 lb. |
| Operating Weight Loaded | 41,500 lb. | 50,000 lb. | 65,000 lb. |
| Turning Circle | 7 ft | 12 ft | 14 ft |
| Wheelbase | 95.5 in. | 138 in. | 158 in. |
| Overall Length | 19.5 ft. | 23 ft. | 24.7 ft. |
| Overall Height | 9.8 ft. | 10 ft. | 11 ft. |
| Overall Width | 8.2 ft. | 8.2 ft. | 8.2 ft. |
| Scraping Width | 8.5 ft - 14 ft | ||
| Engine | 220 hp - 240 hp | ||
| Fuel Capacity | 60 Gallons | ||
| Hydraulic Fluid Capacity | 25 Gallons | ||
| Standard Tire Size | 425/65 R22.5 | ||
| Parking Brake | Spring Applied Wet Disc | ||
| Transmission | Hydrostatic | ||
| Transfer Case | 2 Speed w/ High Range Lock Out | ||
| Low Range Speed | 10 mph | ||
| High Range Speed | 20 mph | ||
| Vacuum Blower | 6in. Lobe blower | ||
| Auxiliary Suction | 15' Long 3" Dia. Suction Hose | ||
| Spreading Option | Front Mount Side Discharge | ||
| Cab | Heat Standard / AC Optional |
Feed Alley Scrapers
The feed alley scrapers are used to keep the feed close to cows.
This makes cows more inquisitive encouraging them to get up and feed more.
- Blade scrapes clear of tire track so you won't run over feed.
Rubber blades have many advantages over traditional steel blades
- Outlast steel blades
- Takes vibration out
- Gentle on concrete
- Rubber blade does not rust
M-905 Bucket Mount
M-900-V Bucket Mount
M-910 Quick Attach Fixed Angled
M-915 Quick Attach Hydraulic Angled
M-920-V Quick Attach
Manure Scrapers
Mensch manure scrapers are used to scrape away manure quickly and easily. Getting right down to the ground the rubber edge cleans in as little as one pass. Made of durable industrial tires and attached to a sturdy 3 1/2 x 3 1/2 x 1/4 wall structural tubing frame, are scrapers are made to last. Rubber scrapers have many advantages over traditional steel blades
- Outlast steel blades
- Takes vibration out
- Gentle on concrete
- Cleans like a squeegee
- Reduce risk of injuring cattle
- Rubber blade does not rust
- Dipped in paint to provide additional protection from the elements
Custom sized to fit your Alleys
| M 500 3-Point | M 600 Bucket | M 700 Quick Tach | M 100 Rubber Base | M 150 w/Pullback | |
| Width | Models | ||||
| 5' - 5' 11" | M500-5 | M600-5 | M700-5 | M100-5 | M150-5 |
| 6' - 6' 11" | M500-6 | M600-6 | M700-6 | M100-6 | M150-6 |
| 7' - 7' 11" | M500-7 | M600-7 | M700-7 | M100-7 | M150-7 |
| 8' - 8' 11" | M500-8 | M600-8 | M700-8 | M100-8 | M150-8 |
| 9' - 9' 11" | M500-9 | M600-9 | M700-9 | M100-9 | M150-9 |
| 10' - 10' 11" | M500-10 | M600-10 | M700-10 | M100-10 | M150-10 |
| 11' - 11' 11" | M500-11 | M600-11 | M700-11 | M100-11 | M150-11 |
| 12' - 12' 11" | M700-12 | M100-12 | M150-12 | ||
| Standard Height | 20" | 15"-17" | 17"-20" |
Bucket Side-Shooters
Bucket Side-Shooters are designed to spread sand or sawdust into free stall barns, back fill, and can be used in many other applications. The bucket contains a positive drive conveyor that dispenses material from either side. From silage to stone the Mensch Side-Shooter shoots it all.
- Positive drive conveyor system
- Durable endless loop track
- Dispenses contents from either side
- Optional agitator to prevent bridging of material
- Track speed varies with engine RPM and is controlled with auxiliary valve control of loader
- Flow is controlled by adjusting shoot door
- 5/8" thick abrasive resistent steel bogie wheels
- Replacable bolt on cutting edge
- Easy conveyor bearing grease access
| Model | Width (ft) | Type | Capacity (yd) | Weight (lb) | Req Hyd Flow min (gpm) |
| M1000 | 5 | Sawdust | 1 | 1050 | 10 |
| M1050 | 5 | Sand | 0.5 | 800 | 10 |
| M1100 | 6 | Sawdust | 1.33 | 1180 | 11 |
| M1150 | 6 | Sand | 0.66 | 950 | 13 |
| M2100 | 7 | Sawdust | 1.5 | 1350 | 11 |
| M1450 | 7 | Sawdust | 2 | 1600 | 11 |
| M2150 | 7 | Sand | 1 | 1200 | 14 |
| M1250-1 | 7 | Sand | 1.75 | 1400 | 15 |
| M1250-2 | 8 | Sand | 2 | 2675 | 15 |
| M1300 | 8 | Sand | 3 | 2875 | 15 |
| M1400 | 8 | Sawdust | 4 | 3250 | 15 |
Trailer Side-Shooter
Simple Barn Design.
Trailer Side-Shooters are used to spread sand or sawdust in many applications including free stall barns. The trailer side-shooter uses a main conveyor to transfer the material to a cross conveyor that dispenses the material 3ft to 25ft.
Box
- 3/16" sides and ends
- Boxed vertical side braces
- Corner reinforcement
Axles
- Walking Beam
- Heavy duty wheel center
- Tires 11R 22.5
Main Conveyor
- AR 400 sprockets
- High torque planetary gearbox drive system
- 3/8" AR 400 steel top chain wear plate
- UWHM lower chain return
Other
- 12,000 lb Jack
- Hydraulic controlled tank door
- Self-contained hydraulics w/ reservoir just attach drive shaft to PTO
- 540 PTO standard, 1000 available
Cross Conveyor
- Oscillating conveyor
- Unloads in 2 1/2 minutes
- Spreads 3 - 25 ft
- Dispenses material from either side
- Aggressive positive drive belt
- 5/8" AR 400 steel wheels
Options
- Wireless remote control
- Flotation tires
- Vibrator
- Height extensions
| Model | Material | Struck | Heaped | Length | Width | Height | Tank Length | Side Angle | Chain Width | Empty Weight | ||||||||
| yd | (m) | yd | (m) | in | (cm) | in | (cm) | in | (cm) | in | (cm) | deg | in | (cm) | lb | (kg) | ||
| 3350 | Sand | 7 | (5.3) | 10 | (7.7) | 208 | (529) | 84 | (214) | 90 | (229) | 144 | (366) | 54 | 30 | (76) | 8075 | (3665) |
| 3355 | Sand / Sawdust | 8.5 | (6.5) | 11 | (8.4) | 208 | (529) | 87 | (221) | 99 | (252) | 144 | (366) | 68 | 36 | (92) | 8450 | (3835) |
| 3380L | Sawdust | 11.5 | (8.8) | 15 | (11.5) | 256 | (650) | 90 | (229) | 99 | (252) | 192 | (489) | 68 | 36 | (92) | 9080 | (4120) |
| 3380H | Sand / Sawdust | 11.5 | (8.8) | 15 | (11.5) | 256 | (650) | 90 | (229) | 99 | (252) | 192 | (489) | 68 | 36 | (92) | 11400 | (5170) |
| 3385 | Sand | 13 | (10) | 17 | (13) | 256 | (650) | 90 | (229) | 100 | (254) | 192 | (489) | 58 | 30 | (76) | 11400 | (5170) |
Truck Mount Side-Shooter
Truck Mount Side-Shooter are used to spread sand or sawdust in many applications including free stall barns. The Truck Mount Side-Shooter uses a main conveyor to transfer the material to a cross conveyor that dispenses the material 3ft to 25ft.
- Oscillating conveyor
- Unloads in 2 1/2 minutes
- Shoots 3-25 ft, depends on flow control, RPM speed, cross-conveyor angle, and material
- Dispenses contents from either side
- 3/16 steel box
- Optional remote control
- Triple sealed bearings on cross-conveyor
- Self-contained hydraulics w/ reservoir
| Single Axle Truck | Yard Capacity | ||
| T 3500-12 | 12' Truck Mount | 7-1/2 yd Struck | 6" Higher Box 9 yd Struck |
| Tandum Truck Axle | |||
| T 3500-16 | 16' Truck Mount | 10 yd Struck | 6" Higher Box 12 yd Struck |
Side-Shooter
Bed Quickly and Efficiently.
The Self Propelled SideShooter will decrease time needed to bed freestalls while reducing amount of material wasted from improper placement.
Independent Conveyor Speeds.
The operator can independently control each conveyor speed (main conveyor & cross conveyor) to accommodate many different bedding types and moisture content in the bedding. The conveyors can be adjust quickly and easily with the turn of a dial from inside the cab.
Excellent Visibility.
The positioning of the cab allows the operator to watch the cross conveyor, the main conveyor, and the material being spread.
Rugged Cab Construction.
The cab features military grade components for long service life. With no controls on the floor to be damaged by the corrosive manure and sand. The rugged cab is easily cleaned.
Cross Conveyor.
The cross conveyor uses an aggressive high speed track, this allows the conveyor to place bedding 3 to 25 feet. Also the track is seamless and fiberglass reinforced with positive drive cogs to provide rugged durability without slipping under load.
| Specs | M 3600 | M 3620 |
| Hopper Capacity Heaped | 15 cu. yd. | 20 cu. yd. |
| Operating Weight Empty | 18,500 lb. | 21,000 lb. |
| Operating Weight Loaded | 45,000 lb. | 65,000 lb. |
| Turning Circle | 7 ft | 12 ft |
| Wheelbase | 119 in. | 167 in. |
| Overall Length | 267 in. | 324 in. |
| Overall Height | 100 in. | 101 in. |
| Overall Width | 98 in. | |
| Engine | 160 hp | |
| Fuel Capacity | 60 Gallons | |
| Hydraulic Fluid Capacity | 25 Gallons | |
| Standard Tire Size | 385/65 R22.5 | 445/65 R22.5 |
| Parking Brake | Spring Applied Wet Disc | |
| Transmission | Hydrostatic | |
| Transfer Case | 2 Speed w/ High Range Lock Out | |
| Low Range Speed | 9 mph | |
| High Range Speed | 20 mph | |
| Discharge Distance | 3 ft. - 25 ft. | |
| Cab | Heat Standard / AC Optional |
Manure Vacuum
Simple Barn Design.
Barns no longer need to have an integrated manure handling system during construction. The Manure Vacuum replaces the need for pumps, augers, and concrete channels to transport manure from the barn to the storage lagoon or process facility.
Reduce Time Spent Cleaning Alleyways.
The Manure Vacuum cleans the alley in one pass. Allowing more time to properly fill and groom freestall bedding. In addition minimized time in the alleyway means reduced wear and tear on the equipment.
Rugged Durability.
The manure vacuum is manufactured from the highest quality of materials and components.
Reduce Expansion Cost.
With the manure vacuum, when a dairy expands their facilities there is no additional equipment to buy. The investment in the manure handling has already been made with a manure vacuum.
Flexible Farm Design.
With the ever changing regulations and restrictions manure systems are forced to change. The manure vacuum adapts to manure system changes.
Remote Manure Processing.
The location of a manure processing facilities is not limited to the ability to transfer the manure. The manure vacuum allows the transport of manure easily and reliably to anywhere on the dairy or even near by.
| Specs | V 2510 | V 3410 | V 4500 |
| Tank Capacity | 2200 gal. | 3000 gal. | 4300 gal. |
| Operating Weight Empty | 20,380 lb. | 21,600 lb. | 24,500 lb. |
| Operating Weight Loaded | 41,500 lb. | 50,000 lb. | 65,000 lb. |
| Turning Circle | 7 ft | 12 ft | 14 ft |
| Wheelbase | 95.5 in. | 138 in. | 158 in. |
| Overall Length | 19.5 ft. | 23 ft. | 24.7 ft. |
| Overall Height | 9.8 ft. | 10 ft. | 11 ft. |
| Overall Width | 8.2 ft. | 8.2 ft. | 8.2 ft. |
| Scraping Width | 8.5 ft - 14 ft | ||
| Engine | 220 hp - 240 hp | ||
| Fuel Capacity | 60 Gallons | ||
| Hydraulic Fluid Capacity | 25 Gallons | ||
| Standard Tire Size | 425/65 R22.5 | ||
| Parking Brake | Spring Applied Wet Disc | ||
| Transmission | Hydrostatic | ||
| Transfer Case | 2 Speed w/ High Range Lock Out | ||
| Low Range Speed | 10 mph | ||
| High Range Speed | 20 mph | ||
| Vacuum Blower | 6in. Lobe blower | ||
| Auxiliary Suction | 15' Long 3" Dia. Suction Hose | ||
| Spreading Option | Front Mount Side Discharge | ||
| Cab | Heat Standard / AC Optional |
Feed Alley Scrapers
The feed alley scrapers are used to keep the feed close to cows.
This makes cows more inquisitive encouraging them to get up and feed more.
- Blade scrapes clear of tire track so you won't run over feed.
Rubber blades have many advantages over traditional steel blades
- Outlast steel blades
- Takes vibration out
- Gentle on concrete
- Rubber blade does not rust
M-905 Bucket Mount
M-900-V Bucket Mount
M-910 Quick Attach Fixed Angled
M-915 Quick Attach Hydraulic Angled
M-920-V Quick Attach